The combo most people end up buying anyway, so we put it in one pack!
Ecrylimer Creator Eco Resin is our most economical formula - same 2.5:1 ratio as Pro, just mix the included Pro Liquid with water (20% liquid, 80% water) and you're away. Makes 4.2kg of product from this pack which is a solid amount to get started with.
Matte Sealer is what you need to finish your pieces - its the one for candle vessels. Sponge or brush it on, let it dry, done. It's the only sealer in our range that works on the inside of candle vessels to stop wax seepage.
What's in the pack:
- 3kg Creator base powder
- 240g Pro Liquid
- 250ml Matte Sealer
Everything fits in a 5kg satchel. If you're making candle vessels or just getting into casting, this is where to start.
Why Ecrylimer CREATOR? By adding just 20% Pro Liquid (included in the pack) plus 80% water, you get a very similar Pro version in a more economical formula.
Safe and Reliable Just like our other ranges, Ecrylimer CREATOR is free from harmful substances such as VOCs, silica, formaldehyde, and biocides.
Tip 1: We highly recommend starting with a smaller pack of Ecrylimer CREATOR to get familiar with the product before committing to larger packs.
Tip 2: You can mix your water and the Pro liquid you will receive into the correct ratio and it will store just fine if you pop it in a sealed container. For example - to make up a 20% mix - it's 800g of water and 200g of Pro Liquid = 100%. That way you don't have to measure out 80% water and 20% Pro Liquid each time.
Stay creative, stay economical, and keep crafting with Ecrylimer CREATOR. At Bramblier, we're committed to supporting your artistic journey, even in challenging times.
Ecrylimer Combo Pack - CREATOR Eco Resin Casting Compound + Matte Sealer
- 2.5 parts base into 1 part water/Pro liquid (2.5:1) by weight
- Weigh 80% of water required in grams - eg 80grams
- Add 20% Pro liquid in grams - eg 20grams
- These 2 together = 100g (1 part)
- Pour in Ecrylimer CREATOR powder (2.5 parts) eg 250grams
- Mix to a smooth consistency by hand mixing (with a fork) for 1 min, or using a mechanical device for 30 seconds.
- Swirl gently a few times to disperse bubbles.
- Drop in pigments and mix.
(Tip -Wait a couple of minutes before pouring to allow bubbles to rise and pop, aiding in smoother flow.) - Demold and set on paper towel or cookie rack to cure.
Working time – 9-15mins (longest working time when hand mixed).
Demold after 35-40 mins from when first poured, allow 50-60 mins for enclosed molds
(Test with fingernail before demolding as the weather & amount, colour and type of pigments can increase/decrease set time)